Difference between VAG Km+immo tool and micronas obd tool (cdc32xx) micronas obd tool (cdc32xx) own more authorization than VAG Km+immo tool, which means micronas obd tool (cdc32xx) only cover CDC32xx, but VAG Km+immo have more functions than micronas obd tool (cdc32xx). http://www.obdresource.com
FAQ:
Q:Is it the same company as supervag? They use the same software, very interesting!
A:Yes, VAG KM+IMMO TOOL working good, If some CDC32XX dash not supported in software, developer can add it in new update, Need only send him flash CDC32xx and 24C32 eeprom.
VAG KM IMMO tool problem with PIN code 24C64
Q: Hi I have a 1T0920881A Dashboard.I have no problem changing kilometers or changing VIN number, but when I try to get the PIN number, the software gives me a wrong pin code. This pin code does not allow to enter in the IMMO.
Can you help me?I’ve checked the cable with 2 micronas clusters, and the PIN CODE given in both micronas (EOS2006 and EOS2008) were OK, but not with the NEC24C64, any suggestion????
A: hello, PIN code for nec24c64 is used for key learning, can’t enter IMMO.
Q: you says this pin is for key learning, ok, where do i enter this pin to key learning?
Is it possible to read and change Serial key (CS) with this dashboard? And in the micronas?
A: hello, there’re two ways to add key, direct patch and key learning. When you add key with VAG KM+IMMO Tool, it uses direct patching method, and display the PIN Code for other tools which need this PIN code for key learning. If you use VAG KM+IMMO Tool to add a key, you don’t need the PIN code.http://www.obdresource.com
Q:I used the PIN given for Key Learning with VCDS to program a new key and it failed but I got to add a key directly with VAG KM+IMMO Tool ….In a future, do you think it will be possible to get the PIN CODE to match a new cluster with the ECU with VAG KM+IMMO Tool?? Is it very complicated??I will be great.
A: for cdc32xx, this PIN code can be used for cluster swapping, but for NEC, it can’t be used for cluster swapping now. We’re working on this.A4 year 2010 no writing new mileage with VAG KM IMMO tool
Q: I have an Audi A4 year 2010. .IMMO software and cable have the software; the tool reads the org mileage. But when I like to write a new mileage, it doesn’t work. Tool says no error. I have waiting 10min but no result.
A: it needs a long time for searching on A4, wait 30 and more min…
Q: but he found the org mileage. When I click write new mileage, I must wait and I don’t see a result.I don’t see a work time or anything.So next work on this mileage, I have tested on an Audi a4 year 2010, the same problem. The software found the org mileage and I give a new mileage to write. Info connects with ECU. I wait 1 hour, but no result.I have tested with 169 and 2, 03 I need support.So I have again tested. Software works on car 1, 5 hours, and then the error. Writing km failedhttp://www.obdresource.com
A: could you please send us the log file? Email:shop@obdresource.com
Send trackbacks to:
http://www.obdresource.com