JDiag FasTPMS Super EL50448 GM Ford TPMS Tool

JDiag FasTPMS Super EL50448 is new product developed by JDiag Electronics Technology Co.,Ltd in 2017, which is able to work with both GM series and Ford series TPMS relearn tool, Super EL50448 is essential tool of replacement tire pressure sensor, tire pressure alarm remove or exchange tires for GM / Chevy / Buick / GMC / Ford / Lincoln / Mercury etc.

You can buy it here: JDiag FasTPMS Super EL50448 GM Ford TPMS Tool

JDiag FasTPMS Super EL50448 Interface

How to switch between GM and Ford brand?

Hold the power button for 3 seconds and 2 LEDs flashing 2 times, selected brand’s LED flashing 2 times.
How to detetied which mode the device in?
Press the power button, if the Green LED flashing, means Super EL50448 in GM mode, if the Red LED flashing, means Super EL50448 in Ford mode.

Super EL50448 Size

How to use Super EL50448?

1. Need 1x Pcs 9V battery to work
2. Set the car in TPMS learning mode. (car horns twice)
3. Starting from the left front tire, the antenna of the dedicated tool for tire pressure monitoring is facing upwards against the tire sidewall near the rim of the valve stem to start the antenna. Press and release the button and wait for the speaker to emit a chirp. Once the speaker is chirping, the sensor information is read and the turn signal to be read at the next position will light.
4. Follow this order to rest TPMS one by one: Front left, front right, rear right, rear left.
5. After all sensors reseted, the car horns twice, the TPMS re-learn finished.

How to set my car in TPMS re-learn mode?
GM series cars:

1. Make the gear in P position.
2. Use cruise to choose TPMS re-learn mode in the dashboard settings.
3. Horn will ring twice and the TPMS indicator flashes, then the learning mode has been successfully entered. If equipped, the message center will display the front left (LF) tire

Ford series cars:

1. Make the gear in P position.
2. With the ignition switch to OFF, press and release the brake pedal
3. Turn the ignition switch from the OFF position to the RUN position 3 times and end at RUN position
4. Depress and release the brake pedal
5. Ignition to OFF position
6. Ignition goes from the OFF position to the RUN position 3 times and ends at RUN position
7. Horn will ring once and the TPMS indicator flashes, then the learning mode has been successfully entered. If equipped, the message center will display the front left (LF) tire
Notice:

1. When using Super EL50448, please make sure antenna in correct position.

2. Please make sure the 9v battery in good condition.

JDiag Super EL50448 Using

JDiag OM123 Code Reader for OBDII/EOBD/CAN From 1996 Original

JDiag OM123 Code Reader is a smart device which able to update online via internet directly. Can work on ALL 1996 and newer vehicles (OBD II & CAN).

You can buy it Here: JDiag OM123 Code Reader for OBDII/EOBD/CAN

OM123 Interface

JDiag OM123 Code Reader Buttons

Features:

1. Works on most 1996 and newer vehicles (OBD II & CAN)-domestic and import.
2. Build-in One-Click I/M Readiness function for quick State Emissions readiness check and drive cycle verification.
3. Retrieves generic (P0, P2, P3, and U0), manufacturer specific (P1, P3, and U1) codes.
4. Able to read pending codes, stored codes and freeze codes.
5. Easily determines the cause of the Malfunction Indicator Light( MIL).
6. Turns off Malfunction Indicator Light (MIL), clears codes and resets monitors.
7. Displays DTC definitions on the 2.4 inch LCD screen.
8. Views freeze frame data.
9. Displays monitor and I/M readiness status (emissions).
10. Reads live data stream, PID more than 130 pcs.
11. Retrieves vehicle information(VIN, CIN and CVN).
12. Detect the vehicle battery condition. (Battery test function)
13. Multilingual menu and DTC definitions- English, Spanish, French, Russian, Germany, Italian, etc.
14. Build-in DTC lookup function.
15. Extremely easy to use and highly reliable.
16. Online upgrade firmware by USB cable.

OM123 Size

Specifications:

1. Display: 2.4” Black&White LCD display
2. Operating Temperature: 0 to 60°C (32 to 140 F°)
3. Storage Temperature: -20 to 70°C (-4 to 158 F°)
4. External Power: 8.0 to 18.0 V power provided via vehicle battery
5. Length\Width\Height: 124 mm (4.61”) \73 mm (2.83”)\22 mm (0.71”)
6. Weight: 0.12 KG (0.26 LB)

OM123 Specifications

Package:

1 x OM123 Interface with OBD II Cable
1 x Multi-languages User Manual

Information:

1. OBDII Support

OBDII Support

2. DLC Location

DLC Location

JDiag JD101 Code Reader for OBDII/EOBD/CAN From 1996 Original

JDiag JD101 Code Reader is a smart device which able to update online via internet directly. Can work on ALL 1996 and newer vehicles (OBD II & CAN).

You can buy it HERE

JDiag JD101 Code Reader Details

Features:

1. Works on most 1996 and newer vehicles (OBD II & CAN)-domestic and import.
2. Build-in One-Click I/M Readiness function for quick State Emissions readiness check and drive cycle verification.
3. Retrieves generic (P0, P2, P3, and U0), manufacturer specific (P1, P3, and U1) codes.
4. Able to read pending codes, stored codes and freeze codes.
5. Easily determines the cause of the Malfunction Indicator Light( MIL).
6. Turns off Malfunction Indicator Light (MIL), clears codes and resets monitors.
7. Displays DTC definitions on the 2.4 inch LCD screen.
8. Views freeze frame data.
9. Displays monitor and I/M readiness status (emissions).
10. Reads live data stream, PID more than 130 pcs.
11. Retrieves vehicle information(VIN, CIN and CVN).
12. Detect the vehicle battery condition. (Battery test function)
13. Multilingual menu and DTC definitions- English, Spanish, French, Russian, Germany, Italian, etc.
14. Build-in DTC lookup function.
15. Extremely easy to use and highly reliable.
16. Online upgrade firmware by USB cable.

Specifications:

1. Display: 2.4” Black&White LCD display
2. Operating Temperature: 0 to 60°C (32 to 140 F°)
3. Storage Temperature: -20 to 70°C (-4 to 158 F°)
4. External Power: 8.0 to 18.0 V power provided via vehicle battery
5. Length\Width\Height: 124 mm (4.61”) \73 mm (2.83”)\22 mm (0.71”)
6. Weight: 0.12 KG (0.26 LB)

Package:

1 x JD101 Interface with OBD II Cable
1 x Multi-languages User Manual

Information:

1. OBDII Support

JD101 OBDII Support

2. DLC Location

DLC Location

JDiag FasCheck BT-200 Universal Car Battery Analyzer

JDiag FasCheck BT-200 Car Battery Tester is an universal car battery life detected tool for most brand car batteries. FasCheck BT-200 use world’s most advanced conductance testing technology, convenient operation, rugged shell, practical design, equipped with 10 different car battery types diagnostic modes which make technicians use with ease and fast performance.

You can click HERE to buy it .

JDiag FasCheck BT-200 Interface

Test modes:

1. Quick test – System will detected car battery automatically;

2. Standard test – Car battery type is able to selected;

3. Cranking Test – Test car battery condition by detecting the start vehicle’s lowest ignition voltage;

4. Charging Test – Detect car battery life by charging and discharging test time;

5. Review Data – Review the last piece data stored in system;

Supported battery types:

CCA: 100-2000

MCA: 100-2000

JIS: 26A17–245H52

DIN:100-1400

IEC:100-1400

EN:100-2000

SAE:100-2000

GB:100-1400

Other types

Product advantages:

1. Positive and negative reverse protection function;

2. High accuracy test results;

3. Multi-type car batteries supported and multi-testing modes supported;

4. Industrial design, easy software design, simple and practical;

5. Multi-languages support;

6. Upgrade supportable, able to add more features in future.

FasCheck BT-200 Clippers

Product Specifications

1. Operating voltage: 7-18 Volts

2. Operating Temperature: 0 to 60°C (32 to 140 F°)

3. Storage Temperature: -20 to 70°C (-4 to 158 F°)

4. VCI Size: Length\Width\Height: 124 mm (4.61”) \73 mm (2.83”)\22 mm (0.71”)

5. Packing Size: 180 mm(L) x 180 mm(W) x 55 mm (H)

6. Weight: 0.45 KG

FasCheck BT-200 Size

FasCheck BT-200 Specifications

Package:

1 x JDiag FasCheck BT-200